Not sure which option? We recommend the right solution after a free on-site assessment.
What's Included
Everything Included in Your Signal Booster Install
We do a full site survey to find the strongest outdoor signal, then install donor antenna, amplifier, and indoor antennas for optimal coverage throughout your space.
Signal Survey
We measure outdoor signal strength at multiple points around your building using professional equipment to find the optimal donor antenna location.
Outdoor Donor Antenna
High-gain directional or omni antenna mounted on roof or exterior wall, aimed at the nearest cell tower for maximum signal capture.
Amplifier Installation
FCC-certified amplifier installed in a central location — sized appropriately for your building square footage and carrier requirements.
Indoor Antenna Coverage
Indoor panel or dome antennas placed for maximum coverage throughout your space — offices, bedrooms, garages, basements covered.
Carrier Compatibility
All installed systems work simultaneously with AT&T, T-Mobile, Verizon, and all US carriers on 4G LTE and 5G bands.
FCC Compliance
All equipment is FCC-approved and legally operates in the US. We ensure proper installation to meet carrier and regulatory requirements.
Who Needs a Signal Booster?
If you have any of these problems, a professionally installed signal booster will solve them permanently:
Dropped calls and missed texts inside your home or office
Slow mobile data that forces you to use WiFi calling instead
Dead zones in basements, garages, concrete buildings, or elevators
Boat captains and marina operators needing reliable marine coverage
Warehouses and large commercial buildings with poor indoor coverage
Remote properties and rural locations with weak carrier signal
Dropped calls and one-bar signal the moment you walk inside
↓
A properly installed booster typically increases indoor signal from 1–2 bars to 4–5 bars — calls stay connected throughout your building
Mobile data so slow you can't stream or download anything indoors
↓
Signal boosters amplify 4G LTE and 5G data signals — restoring full-speed data in areas where your phone barely functions
How It Works
Measured, Installed, and Verified
Signal booster installs take 2–4 hours for most residential and small commercial properties.
Step 01
Signal Survey
We measure outdoor signal strength at multiple locations using a spectrum analyzer to find the strongest available signal and optimal antenna placement.
Step 02
Antenna Mounting
Donor antenna mounted and aimed at the nearest cell tower. Indoor antennas positioned for maximum coverage throughout your space.
Step 03
Amplifier Install
Amplifier unit installed in a central location, connected to outdoor and indoor antennas. System powered and configured.
Step 04
Coverage Verification
We walk every room and measure signal strength with and without the booster active — confirming you're getting full coverage before we leave.
Free on-site assessment included. We visit, evaluate, and give you a fixed quote — no surprises, no obligation.
FAQ
Mobile Signal Booster Installation — Common Questions
Will a signal booster work if there's no outdoor signal at all?
Signal boosters amplify existing signal — they cannot create signal where none exists. We measure your outdoor signal first. You typically need at least -100 dBm outdoor signal for a booster to be effective. Most South Florida locations have sufficient outdoor signal even when indoor signal is poor.
Do signal boosters work with all carriers?
Yes. The systems we install are wideband boosters that amplify all US carrier frequencies simultaneously — AT&T, T-Mobile, Verizon, US Cellular, and all MVNOs. You don't need a separate booster for each carrier.
Are signal boosters legal to use?
Yes, FCC-certified signal boosters are 100% legal for use in the US. All carriers are required to accept FCC-certified boosters on their networks. We only install FCC-approved equipment that meets all regulatory requirements.
How much area does one booster system cover?
Coverage depends on the booster model and the number of indoor antennas. A residential booster typically covers 2,000–5,000 sq ft. Larger commercial spaces may require multiple indoor antennas or a commercial-grade unit. We size the system appropriately during the site survey.
Will a booster interfere with my neighbors?
No. FCC-certified boosters operate at controlled power levels specifically designed to not interfere with carrier networks or neighboring users. The indoor signal is contained within your building.
Can a booster be installed on a boat?
Yes. Marine signal booster installations are one of our specialties. We use marine-grade mounting hardware and routing suitable for the saltwater environment. A boat-installed booster keeps you connected whether you're at anchor or underway in South Florida waters.
Get Started Today
Ready for Full Bars Everywhere in Your Building?
Free site survey — we measure your outdoor signal strength and design the right booster system for your space before any purchase.
Free site assessment — no obligation
Fixed quote before any work starts
Same-day installation available
5-year warranty on every install
Get a Free Quote
We'll respond within 1 hour
You're all set!
We'll call within 1 hour to schedule your free on-site assessment.